Motocross and enduro adhesives and tapes - repairing, sealing and securing your motorcycle

Adhesives & Tape is where you go when your MX/off-road gear or bike needs a fast, reliable fix that survives vibration, mud, and pressure washing. From securing grip ends and sealing airbox joints to patching plastics, protecting frame contact points, or stopping a cable from rubbing through, the right glue or tape prevents small issues from turning into a DNF. It also helps with gear maintenance—reinforcing worn spots on pants, keeping goggles foam seated, or managing hydration and wiring on the bars. Choose based on compatibility and purpose first: plastics and composites often need specific plastic adhesives, while general-purpose options won’t bond to oily or flexible surfaces. Pick the type for the job—threadlocker for bolts, RTV/silicone sealant for engine and intake sealing, contact adhesives for fabrics, and high-temp epoxy for durable structural fixes. Consider riding conditions: wet clay, sand, heat, and frequent washes demand water-resistant, temperature-stable products, while quick-trackside repairs favor fast cure times. Prep and maintenance matter: degrease, dry, and roughen the surface where appropriate; most failures come from poor surface prep, not weak product. Common mistakes are using the wrong tape width/thickness for abrasion zones and applying adhesives over dirt, chain lube, or coolant residue. Replace tape when edges lift, the surface goes glossy and slippery, or it starts collecting grit; recheck critical areas after the first ride and after any pressure wash. Tip: Clean with brake cleaner, let it fully flash off, then apply tape/adhesive and give it time to cure before the next ride.